If you have opened up your washer and noticed your clothing is still quite a bit soaked, have run it through a drain cycle, and still have water in the tub, you may have a clog somewhere. Don't worry—it's a fairly simple repair. But if you aren't too handy, this may be something you want to leave to a repair specialist. Call your local washing machine repair shop to have a technician come out to your home to do this repair for you. If you think you can handle the job, see below for repair instructions.

Here's What You'll Need

  • Screwdrivers (Phillips and flat)
  • Clamps
  • Nut driver
  • Needle-nose pliers

Instructions:

  1. To start, empty out the washing machine. If need be, wring out your wet clothes, then hang them outside to dry most of the way before placing them into your dryer. Putting them in your dryer while they're soaking wet will take a lot longer to dry (and you'll use more energy). 
  2. Next, empty the water out of the machine. Use a bucket or bowl to empty the water into a nearby sink or toilet. 
  3. Once you have almost all of the water out (as much as you can get out), unplug the machine and take the front panel off using a nut driver. This will expose the pump inside.
  4. Place a clamp on the drain hose to prevent any water from coming out of it that may still be in your machine. If need be, you can prop the front of your machine up onto paint cans (or something else sturdy).
  5. Once you have the pump exposed, check the pump for any clogs. Sometimes smaller items can get washed down the drain and into the pump. If you see the clog, remove it. If you don't see any clogs, move on to the next step.
  6. Check to see if the pump is broken. If the pump is broken, you'll need to replace it with a new one. A new pump can be found at your local parts supply store or online. Remove the screws holding the pump in place, then replace it with the new one.
  7. Once you have the new pump in place, replace the front panel, remove the paint cans (or other item holding your machine up), then plug the machine back in. 
  8. Test to be sure it is draining properly again by running a quick cycle.

A machine that doesn't drain properly can result in water damage to your floors and further damage to your machine. If you notice your machine isn't draining properly, check for a leak and inspect the pump. If you still have problems, contact a machine repair technician today to have your machine repaired.

Share